The steel drum sealing ring is a kind of rubber ring with circular or rectangular section. The most commonly used sealing ring section is O-type, so it is called O-type sealing ring.
It is one of the most widely used steel barrel sealing rings.
The goods of steel bucket are different, so the sealing ring of different materials should be used to meet the requirements of different goods.
Today we will introduce various commonly used sealing ring materials to see which one is more suitable for you.
1. NBR nitrile rubber sealing ring
Suitable for petroleum hydraulic oil, glycol hydraulic oil, diester lubricating oil, gasoline, water, silicone grease, silicone oil and other media.
Is currently the most widely used, the lowest cost of rubber seals.
Not suitable for polar solvents such as ketones, ozone, nitro hydrocarbons, MEK, and chloroform.
The general use temperature range is -40~120 ℃.
2. HNBR hydrogenated nitrile rubber sealing ring
It has excellent corrosion resistance, tear resistance and compression deformation resistance, ozone resistance, sunshine resistance and weather resistance.
Better wear resistance than nitrile rubber.
It is suitable for washing machinery, automobile engine system and refrigeration system using new environment-friendly refrigerant R134A.
Not recommended for use in alcohol, ester, or aromatic solutions.
The general use temperature range is -40~150 ℃.
3. SIL silicone rubber sealing ring
It has excellent heat resistance, cold resistance, ozone resistance and atmospheric aging resistance.
It has good insulation properties.
But the tensile strength is worse than the general rubber and has no oil resistance.
Applicable to household appliances such as electric water heater, electric iron, microwave oven, etc.
It is also applicable to all kinds of things that are in contact with the human body, such as water bottles, drinking fountains, etc.
Not recommended for use in most concentrated solvents, oils, concentrated acids and sodium hydroxide.
The general use temperature range is -55~250 ℃.
Short comments: we have several gaskets for drum closure can be chosen: PE/EPDM/NBR.
Specification For Cold Rolled Steel Plates For Steel DrumsJune 30, 2022European Steel Drum Manufacturers Association (SEFA) recommendationsThe proposal was developed by the European Steel Drum Manufacturers Association (SEFA) in collaboration with supplier members of the...view![[Knowledge Science] Lubricating Oil Application Common Problems Summary-1](/uploads/image/20220701/16/lubricating-oil-application-common-problems-summary_400x400.jpg)
[Knowledge Science] Lubricating Oil Application Common Problems Summary-1July 1, 20221. The use of lubricating oil in the process of blackening is normal?Answer: black oil for three reasons: (1) oil metamorphism, (2) parts wear, (3) the impurities into the fuel tank, if in use process...view
Kinds Of Drum Closure Gasket3July 1, 20227. CR neoprene sealing ringSunlight and weather resistance is especially good.Not afraid of dichlorodifluoromethane and ammonia and other refrigerants, resistance to dilute acid, silicone grease lubri...view
Market Demand Analysis And Raw Material Selection For Steel Drum PackagingJuly 1, 2022The barrel-making materials must meet the following requirements:(1) The barrel-making needs to use high-quality low-carbon steel, the material must have good plasticity and deformation stability, and...viewDrum fittings must be compatibleMay 19, 2023Many factors must be considered when selecting new steel drum fittings for shipping hazardous and non-hazardous goods packaging. One important reason for this is that drum producers must carefully con...view
Talking About The Future Development Trend Of Transportation PackagingJuly 1, 2022Although, fast development of logistics industry in China, the total transportation rise year by year, but due to the packaging design technology in China starts late, not form a complete knowledge sy...view
EN
ko 
fr 
de 
es 
it 
ru 
pt 
ar 
vi 
th 
